舰船燃气轮机高压涡轮动叶多维热耦合设计方法

针对舰船燃气轮机复杂高效冷却叶片设计,基于压力修正算法建立冷却叶片一维管网设计方法;通过快速求解可压缩边界层微分方程获得叶片外换热边界,基于参数化的叶片网格生成方法,采用全隐式有限体积的固体导热求解方法,构建了冷却叶片的耦合传热模型,开发了耦合传热计算程序。对某高压涡轮动叶进行多维热耦合设计,确定冷却流路及冷气分布,通过三维气热耦合计算验证了设计方案的可行性,通过对比分析验证了多维热耦合设计方法对主要流通单元的流量、压力误差小于5%,具备较高的工程应用价值。     

Review of the phase change material (PCM) usage for solar domestic water heating systems (SDWHS)

The shortage in energy resources combined with the climb in greenhouse emissions is the main incentive beyond the deployment of solar energy resource in various applications. One of the most successful applications is the utilization of solar energy in the domestic water heating systems (DWHS) because 70% of the consumed energy in the residential segment is utilized for space heating and appliances in cold climates 1 . However, the full deployment of solar energy in domestic water heating is only possible when an energy storage system with acceptable price is available. Recently a new tendency for deploying phase change materials (PCMs) as an energy storage system is introduced in several solar DWHS. These systems are known as integrated PCM in solar DWHS and offer several advantages including high storage capacity, low storage volume, and isothermal operation during the charging and discharging phases. The present study reviews various techniques utilized for integrating the PCM in solar water heating systems and the utilized methods for enhancing the heat transfer characteristics of the PCM through the usage of extended surfaces and high conductive additives. Copyright © 2017 John Wiley & Sons, Ltd.     

Design and fabrication of thermoelectric waste heat reutilization system—possible industrial application

The current article discussed the detail design and development of an experimental test rig to derive usable energy by utilizing the waste heat energy through a heat exchanger made of Bi₂Te₃ material. The accuracy including the efficiency of the fabricated device is demonstrated further by verifying the associated parameter through a simulation model (commercial finite element package, ANSYS 15.0). To imitate the waste hot air from the industry is achieved via a heat gun and fed to the test rig for the generation of thermoelectric power. The simulation model accuracy has been demonstrated by juxtaposing the associated experimental data and computational readings. Subsequently, the feasibility and optimum range of design parameters are established by comparing the experimental and the simulation data (triggered temperature difference, voltage output, and heat flux) generated at the interface of the thermoelectric power generators. In addition, the coefficient of determination (R²) value has been evaluated statistically and verified with the current experimental results for the demonstration of the relevancy. The statistical study shows the existence of the correlation between the current experimental and the simulation model. Also, the experimental result indicates the possible implementation of the newly developed system for the recovery from the waste heat either the automobile exhaust or any other kind of dissipated heat from the industries.     

基于复合相变材料的梯级组合蓄热特性研究

针对潜热蓄热装置内部相变材料（PCM）导热系数偏小，蓄热速率过低的问题，对基于复合相变材料的两级串联式梯级蓄热装置的相变过程进行了数值研究。通过对不同热物性PCM工况的对比与分析，得到了装置在不同工况下的蓄热特性。结果表明，存在最佳的热扩散系数，使固定熔点的PCM实现“均匀等速相变”。同时，增大PCM的热扩散系数可以有效降低加热面温度，但随着热扩散系数的增大，加热面温度降低幅度减小。通过分析Stefan数，得到了装置最佳的参数，使工况蓄热效果最佳。最后，通过Stefan数为2.88时的实验工况验证了相关规律的正确性。     

初始制动时预测湿式制动器热对流特性的积分方法

湿式制动器对重型车辆安全具有关键影响，以湿式制动器摩擦副间隙的冷却液压油（Automotive transmission fluid，ATF）为研究对象，考虑车辆初始制动阶段流体的黏性摩擦和层流流动特征，利用积分方法建立了摩擦副流体的非稳态能量方程，并获得了能同时满足轴向和径向边界条件的三维温度和热流密度显式解析表达式，通过简化动量方程和多项式分布假设也获得了径向速度和压力的理论解，与以往试验对比表明，压力和温度解析解与试验结果具有较好的一致性，理论模型有望推广用于液黏离合器等其他HVD装置的ATF速度场、温度场和热流密度场的理论预测。     

Novel low‐dielectric‐constant fluorine‐functionalized polysulfone with outstanding comprehensive properties

In this work, a series of fluorine‐functionalized polysulfone (F‐PSU) copolymers with intrinsic low dielectric constants (low ε) are reported, which are derived from the polycondensation reaction of 4,4′‐dichlorophenyl sulfone with bisphenol A and bisphenol F (BPF) compounds. The resulting F‐PSU copolymers show high glass transition temperatures (T_g) varying from 187 to 201 °C and are thermally stable up to 500 °C under an N₂ atmosphere. The introduction of BPF units into the PSU copolymers imparts enhanced hydrophobic properties to the F‐PSU films with increased water contact angle values from 66.2° to 93.7°. Moreover, the dielectric constant and dielectric loss of the F‐PSU (sample V) film are as low as 2.2 and 0.003 at 1 kHz, respectively. Interestingly, the dielectric properties are relatively stable to near the glass transition temperature, which is because of the existence of BPF structures in the molecular backbone. Furthermore, the F‐PSU copolymers are soluble in common solvents and can be readily fabricated into flexible transparent films by the spin casting method. © 2020 Society of Chemical Industry     

Nonlinear convection in an elasticoviscous fluid‐saturated anisotropic porous layer using a local thermal nonequilibrium model

By adopting a perturbation method and a local thermal nonequilibrium model, nonlinear thermal convection in an anisotropic porous layer saturated by an elasticoviscous fluid is investigated. An elasticoviscous fluid is modeled by a modified Darcy‐Oldroyd‐B model, and the fluid and solid phase temperatures are represented using a two‐field model for the heat transport equation. Anisotropy in permeability and fluid and solid thermal conductivities are considered. A cubic Landau equation is derived separately to study the stability of bifurcating solution of both stationary and oscillatory convection, and the results of linear instability theory are delineated. The boundary between stationary and oscillatory convection is demarcated by identifying codimension‐two points in the viscoelastic parameters plane. It is found that the subcritical instability is not possible, and the linear instability analysis itself completely captures the behavior of the onset of convection. Heat transfer is obtained in terms of Nusselt number, and the effect of governing parameters on the same is discussed. The results of the Maxwell fluid are obtained as a particular case from the present study.     

严寒地区SiO2气凝胶玻璃窗传热分析

建立了二氧化硅(SiO_2)气凝胶中空玻璃窗传热数值模型,采用有限体积法分析了二氧化硅气凝胶厚度和位置对严寒地区玻璃窗传热的影响。结果表明:二氧化硅气凝胶厚度增加,能够提高玻璃窗内表面温度,降低其热流密度。二氧化硅气凝胶厚度为20 mm时,玻璃窗内表面热流密度为67.5 W/m~2。二氧化硅气凝胶位于室内侧能够更有效地减少建筑能耗,其总能耗为60 120 W。     

合成氨废热锅炉制造工艺改进

废热锅炉是Cassle合成氨技术中的关键设备,本文以某改造项目Cassle技术废热锅炉为研究对象,阐述了废热锅炉的结构特点,结合化工厂反馈的问题,针对关键工序提出了改进措施,为制造类似结构和要求的产品积累了宝贵经验。     

热处理工艺对TC4钛合金冲击磨损性能的影响

研究了退火和固溶时效处理对热轧态TC4钛合金的力学性能和组织的影响,并考察了其冲击磨损性能。结果表明:退火处理后试样组织中转变β相增加,强度、塑性和韧性均较热轧态有所提升;而固溶时效处理后试样组织的晶粒细化且尺寸更为均匀,同时具有最高的强度,而塑性和韧性则较热轧态有所降低。经过10 h的冲击磨损试验后,退火态试样的磨损率最低,而固溶时效态试样的磨损率最高。通过磨损断口观察发现退火态试样表面冲刷犁沟较短,且终点处存在合金的塑性堆积,同时磨损面组织发生塑性变形,晶粒延展拉长。退火态试样较高的塑性和韧性有助于吸收冲击能量,因此表现出较好的耐冲击磨损性能。